Assist™Senior ChemistTell me about your application. I'll engineer the complete solution.
I'm INCURE Assist™ — your Incure senior chemist, on call any hour. Describe what you're bonding, sealing, potting, masking, encapsulating or coating, and I'll recommend the right chemistry, the right curing equipment, and give you honest budgetary numbers to plan around. Running a Loctite®, Dymax® or other incumbent adhesive? Ask about a qualified lower-cost second source — same process, dual-region supply.
Switch & save →Or jump straight to what you need
Each path pre-loads the consultation with the right questions.
Bonding
Structural joins on plastics, metals, glass, rubber — instant CA, UV/LED, or epoxy.
Sealing & Gasketing
Form-in-place gaskets, seam sealing, leak-proofing against fluids and weather.
Potting & Encapsulating
Deep-section protection for electronics against shock, moisture and heat.
Conformal Coating
PCBA protection — silicone, UV-cure and high-temp ceramic systems.
Masking
Peelable UV maskants and silicones for plating, sandblasting and wave solder.
Doming & Optical
Crystal-clear dome coats, lens bonding and optical assembly adhesives.
Paying too much for a single-sourced adhesive?
The Incure Adhesive Cost Migration & Second-Source Programme helps manufacturers qualify a technically suitable alternative — matched to your existing dispensing and curing process — that lowers total supply cost and removes single-source risk. Candidates are potential alternatives subject to application validation, supplied from Incure Inc. (USA) and Incure SGP (Singapore).
Cost Migration Centre
Reduce adhesive supply costs with a qualified Incure alternative — the full seven-step conversion process.
Total Cost Calculator
Model the annual saving across material, waste, MOQ, freight and downtime — not just price per kilogram.
Qualification Toolkit
Migration checklist, comparison-report format and a sample qualification protocol built for change control.
Loctite® UV Alternatives
Application-by-application mapping of Loctite® UV adhesive categories to Incure candidate families.
Dymax® Medical Alternatives
ISO 10993-5 compliant Cyro-Weld™ grades as second-source candidates for medical device assembly.
More Brand Alternatives
Brand-by-brand guides: Panacol®/Vitralit®, Tangent™, DELO®, Permabond®, Master Bond®, HumiSeal® and Norland — all candidates subject to application validation.
Request an Assessment
Send the incumbent brand and product number — get candidate grades, an evaluation plan and budgetary pricing.
Let's talk through your application
Eight quick questions — the same ones I'd ask across a lab bench. Skip anything you're unsure of.
Product Explorer
The full Incure formulary — engineered products. Click any card for the complete technical & commercial picture.
Curing Equipment
The adhesive is only half the solution — the cure is the other half. Incure light-cure chemistries are validated against our own LED systems, so lamp and material are guaranteed to match.
Indicative budgetary pricing for planning purposes only — final quotation depends on configuration, lightguides, optics and region. Ask us for a formal quote and a free cure-validation trial on your actual parts.