Assist™Senior ChemistTrademark notice. Permabond® is a trademark of Permabond LLC. Incure Inc. is not affiliated with, endorsed by or sponsored by Permabond LLC. Product names are used solely to identify the incumbent products customers ask us to evaluate against. Every Incure candidate below is a potential alternative subject to application validation — not a claimed drop-in replacement.
Chemistry-by-chemistry mapping
| If your Permabond® product is… | Incure candidate family | Representative grades (Incure database values) |
|---|---|---|
| A UV / light-cure adhesive (plastic, glass, metal bonding) | Cyro-Weld™ / Uni-Weld™ UV bonders (325 grades) | 1910 — 30–60 cP, −55 to 150 °C, high shear · 2463 — 450–900 cP · 2813 — 2,700–5,400 cP structural; wicking to non-sag gel |
| A medical-grade UV adhesive | Cyro-Weld™ UV medical adhesives | 5002F — 300–600 cP fluorescing, ISO 10993-5 compliant · 5463 — 400–800 cP sterilisation-stable · 5480F — 40–80 cP wicking, elongation >500% |
| A cyanoacrylate (instant adhesive) | Heat-Resist™ and medical CA family (27 grades) | 311 — high-temp ethyl CA, 2,000–3,000 cP, −55 to 145 °C, rubber-toughened, bonds up to 5,200 PSI on steel; medical CA grades available |
| A structural or engineering epoxy | Epo-Weld™ epoxy systems (133 grades) | High-strength structural, thermally conductive (HTE-5350), optical-clear (HTE-5351), stainless-filled repair (HTE-5352), flexible (HTE-5354) |
| A high-temperature epoxy | Epo-Weld™ HTE series | See the high-temp mapping in the Master Bond® guide — the same Incure family serves both migrations |
Scope note, stated plainly. Anaerobic threadlockers and retaining compounds are a Permabond® speciality that Incure does not currently manufacture. If your BOM mixes anaerobics with UV, CA or epoxy grades, Incure can second-source the latter three and will say exactly which line items it cannot cover.
Why engineers shortlist Incure
- Same three families, one supplier review: UV/LED acrylics, CAs and epoxies from one manufacturer simplifies multi-grade migrations.
- Dual-region supply: the same formulation from Incure Inc. (USA) and Incure SGP (Singapore) — a structural second-source advantage.
- Process matching: viscosity, fluorescence and cure response tuned to your dispensing and curing equipment; custom viscosity available.
- Transparent budgetary pricing: pack sizes, MOQs and indicative USD pricing for all 506 products in the INCURE Assist™ portal.
How the evaluation works
The seven-step conversion process applies: submit the Permabond® product number, receive the closest candidates with database values, evaluate with samples at recommended settings, and qualify on your own evidence using the comparison-report format. Incumbent values come from Permabond's current published TDS — never estimated.
Technical data sheets. Download the TDS (PDF) for Incure grades referenced on this page: Cyro-Weld™ 5002F. TDS and SDS for all other grades — including custom-viscosity versions — are supplied with the evaluation package: request an assessment.
Request a Permabond®-to-Incure evaluation Estimate the annual saving
Incure figures are database values for the referenced Incure grades (viscosity in cP, temperature in °C, strength in PSI); they are not measurements of, or claims about, any Permabond LLC product. Candidate suitability is always subject to application validation on your parts and process.